Bayliner 265 Specifications download pdf (Page 47)

265 • Owner’s Manual Supplement Chapter 6: Plumbing

Freshwater System Winterization

1. Turn On the freshwater pump switch.

2. Open all of the faucets and showers and let the freshwater system drain completely.

3. Turn Off the freshwater pump switch.

All remaining water must be removed from the water lines. There are two ways to remove the remaining water from

the lines:

• Compressed Air

• Gravity Draining

Compressed Air

You must have an air compressor with an air hose and

an air nozzle.

1. Remove the water line from the outlet side of the

freshwater pump (opposite side from filter).

2. Open the faucet that is furthest away from the fresh-

water pump.

3. Place the air nozzle against the end of the just

removed water line and blow air through

the system.

4. When water stops coming out of the Open

faucet, stop the air and Close the faucet.

5. One at a time, repeat this process on all faucets and

showers.

Gravity Draining

1. Open all faucets and showers.

2. Remove the drain plug from the tee fitting on the

freshwater tank.

3. When the water has stopped draining from the

freshwater tank, replace the drain plug.

WATER SYSTEM DAMAGE HAZARD!

NEVER blow compressed air through the water system when all of the faucets are Closed.

CAUTION

TYPICAL VIEW

NOTE: LOCATION OF TEE FITTING

& DRAIN PLUG MAY VARY

FRESHWATER TANK

FILTER

FRESHWATER

OUTLET SIDE

WATER LINE

INLET SIDE

WATER LINE

DRAIN PLUG

TEE FITTING

PUMP

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 83 84

Comments to this Manuals

No comments

Bayliner 265 Specifications Page 47

Comments to this Manuals

Related products and manuals for Carbon monoxide (CO) detectors Bayliner 265