Bayliner 2452 Classic Cruiser Specifications download pdf (Page 28)

Chapter 6: Plumbing 2452 Classic Cruiser • Owner’s Manual Supplement

Autofloat Switches

• The automatic bilge pumps use electromagnetic float switches (autofloat) to turn On the pumps whenever water

rises above a preset level in the bilge.

• One autofloat switch is mounted next to each automatic bilge pump.

• The autofloat switches are wired directly to the battery and will normally function even when the boat is com-

pletely shut down and left unattended.

Test the autofloat switches often

as follows:

1. Push the float switch test button

up to turn On the bilge pump.

• If the pump does not turn On,

check the inline fuse.

• If the fuse is good but the switch

still doesn’t work, it may mean

the switch is bad or possibly the

battery is low.

2. Push test button all the way

down to return the float switch

to auto mode.

PUSH SWITCH DOWN

LIFT SWITCH UP

BILGE PUMP SHOULD TURN ON BILGE PUMP SHOULD TURN OFF

FLOAT SWITCH

TEST BUTTON

TESTING

When the test is completed on each float switch, you MUST push the test button all the way

down to the auto position to return the switch to auto mode!

CAUTION!

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 63 64

No comments

Bayliner 2452 Classic Cruiser Specifications Page 28